-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Shaughnessy Report: Doing My Part for Medical Electronics
February 24, 2016 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
If you’re like me, and most of you are, you’ve started getting mail from AARP. You exercise, because if you don’t, you feel like a fat slob. Your body hurts more often, and you just deal with the pain until it gets bad enough to go to the doctor. This is especially true for men; tough guys like us don’t like going to the doctor, unless we’ve actually severed an artery. Otherwise, we don’t need no stinkin’ doctors!
So when I first suspected I might have a hernia, I thought, “What is this thing poking through my stomach? I’ll just ignore it, and it will go away, like a noise in my car’s engine.” It hurt the most when I cut the grass on my riding mower, so I quit mowing the lawn. I liked that part!
But the pain didn’t go away. Eventually, when the pain got worse, my fledgling men’s common sense kicked in and I visited my local sawbones. “Not a big deal. Just routine outpatient surgery,” the doctor opined. “You’ll be in and out in a couple of hours, with a cool scar to boot, and some great painkillers.”
The surgeon couldn’t operate on my timeline; it had to be the week before Thanksgiving, or right before Christmas. I picked the former, so I’d be more or less healed by Christmas.
On operating day, a nurse got me all prepped and ready for the scalpel. They gave me a shot of something similar to Valium (the Propofol came later), and wheeled my bed down the hall. All I could see were ceiling lights going by, just like on “House.”
Then we entered the operating room. The middle of the operating room was empty, because my rolling bed was going to be parked there. But the walls were ringed with dozens of beeping and pinging electronic monitors. I’ve never seen so many electronic devices together in my life. I saw one Agilent monitor, and a bunch of others with names I couldn’t make out. It reminded me of the IT room in most companies. I guess they had to be set up to handle routine surgery like mine, and the not-so-routine operations as well.
To read this entire article, which appeared in the January issue of The PCB Design Magazine, click here.
Suggested Items
KLA Corporation Reports Fiscal 2024 Third Quarter Results
04/26/2024 | KLAKLA Corporation announced financial and operating results for its third quarter of fiscal year 2024, which ended on March 31, 2024, and reported GAAP net income of $601.5 million and GAAP earnings per diluted share of $4.43 on revenue of $2.36 billion.
Rogers Corporation Reports Q1 2024 Results
04/26/2024 | Rogers CorporationNet sales of $213.4 million increased 4.3% versus the prior quarter resulting from higher sales in the AES and EMS business units. AES net sales increased by 4.1% primarily related to higher aerospace and defense (A&D), wireless infrastructure, industrial and renewable energy sales, partially offset by lower EV/HEV and ADAS sales. EMS net sales increased by 2.8% primarily from higher general industrial, A&D and EV/HEV sales, partially offset by seasonally lower portable electronics sales.
Cadence Reports First Quarter 2024 Financial Results
04/23/2024 | Cadence Design Systems, Inc.Quarter-end backlog was $6.0 billion and current remaining performance obligations ("cRPO"), contract revenue expected to be recognized as revenue in the next 12 months, was $3.1 billion.
NOTE Releases Interim Report for January-March 2024.
04/23/2024 | NOTENOTE has announced its interim report for January-March 2024.
Aspocomp’s Q1 Net Sales and Operating Result Decreased YoY
04/18/2024 | AspocompInflation and interest rates, weak economic development, the uncertainties posed by Russia’s war of aggression and the situation in the Middle East, and global trade policy tensions will affect the operating environment of Aspocomp and its customers in the 2024 fiscal year.