-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Additive Manufacturing Requires Additive Design Techniques
May 9, 2022 | Luca Gautero, SUSS MicroTecEstimated reading time: 2 minutes
Although I am not a designer by trade, I want to share my thoughts on what additive manufacturing means for designers, especially how it relates to solder mask. I feel the following topics are the most important to address.
1. Definition of Solder Mask
By its nature, the definition provided by any EDA tool is a negative one; the CAM vector files specify what goes away from an assumed continuous surface. Until now, solder mask has always presented itself as subtractive. SUSS MicroTec developed a front end, JETxSMFE, that can operate at the CAM station to smooth out manufacturing. The software understands all of this, managing the details correctly on the incoming files.
2. The Advantage of Inkjet Solder Mask
One advantage of inkjet solder mask is to avoid any filling of holes or vias. Another way, maybe an annoyance to some, is to say that “tenting” is not possible. Still, the consensus is that solder mask-free vias improve a board’s reliability (Figure 1). The JETxSMFE removes solder mask at declared holes. Undeclared drills, which might still exist depending on the manufacturing convention on the production floor, will result in ink on the print table. This is not a big issue as a scraper easily removes excess solder mask, and alternatively, replacing the table or its liner (if present) gets the job done. However, both solutions lead to a small downtime. Long story short, if you want friends on the shop floor, be sure to have all the drills in your design.
3. The Dam Dogma
These small solder mask traces on laminate are supposed to separate two nearby copper pads. Such a pattern indicates the non-solder mask defined (NSMD) pad design choice. However, this choice involves several constraints, and these create an artificial need for narrow dams. From my earlier example, this time with numbers: Imagine two pads, 200 µm apart, nothing extreme. What is the maximum size of a dam between these two? Assuming that LDI technology is used, the dam size results from applying the state-of-the-art constraint of the technology. This 200 µm pitch decreases by the laser beam width plus the registration accuracy twice—one for each pad. Therefore, it quickly comes down to 100 µm. Any more challenging a pad distance will also make it harder to define a dam.
From this reasoning, the many requests to create 50 µm dams or less with traditional technology seem legitimate. So, what do we do with inkjet printing? Does it join the race to the last micrometer?
To find out the answers, continue reading this article in the April 2022 issue of Design007 Magazine.
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Apollo Seiko Presents the Next Frontier in Non-Contact Soldering at 2024 IPC APEX EXPO
03/12/2024 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is pleased to announce plans to showcase its latest advancements at Booth 1408 during the 2024 IPC APEX EXPO, taking place April 9-11, 2024 at the Anaheim Convention Center in California.