-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
Article Highlights
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Four Reasons to Choose Polycapillary Optics for XRF Coatings Analysis
January 29, 2020 | Hitachi High-Tech Analytical Science AmericaEstimated reading time: 3 minutes
As electronics and electronic components continue to shrink and increase in complexity, metal finishes on these components need to be plated onto smaller features—as thinner layers—with tighter controlled tolerances. If finishes are too thin, the product won’t meet performance specifications and could fail prematurely, risking warranty claims, safety and damage to reputation. If platings are too thick, the cost of plating material increases and money is wasted, plus there are possible issues with mechanical fit of the plated components that could result in costly scrap or rework.
X-ray fluorescence (XRF) is a widely used technique for measuring coating thickness and material composition because it’s non-destructive, fast and straightforward to use. To measure coatings on small features, traditional XRF instruments use a mechanical collimator to reduce the beam size of the X-ray tube down to fractions of a millimeter. This is achieved through the instrument by placing a metal block, with a small hole drilled through it, in front of the X-ray tube, allowing only the X-rays aligned with the hole to pass through and reach the sample. Using this method, a vast majority of the X-ray tube output cannot be used for analysis, as it’s stopped by the collimator block.
Figure 1: A comparison of the collimator and capillary methods.
Today’s approach to address the need to measure fine features is to use a polycapillary optic. This type of focusing optic is comprised of arrays generated from thousands of small and hollow glass tubes which are curved and tapered. Using this method XRF can easily accommodate a wide variety of geometries relative to the complexity and miniaturization of components which typically need to be plated within the electronics industry. Within a polycapillary optic, the X-rays are guided through the tubes using reflection, which is very similar to the way light is guided in fiber-optic technology. The polycapillary optic is paired to a micro-spot X-ray tube to collect more of the tube’s output. This focuses it onto smaller areas with flux that is orders of magnitude greater than that of a mechanically collimated system. Polycapillary optics in XRF coatings analyzers have several advantages:
Figure 2: Chart detailing how a polycapillary optic functions.
1. Smaller Feature Measurement
Polycapillary optics have a beam size of less than 20 µm, making it possible to measure ultra-fine features on microelectronics, advanced circuit boards, connectors, lead frames and wafers. This allows measurement of areas that can’t be achieved with the traditional mechanical collimators.
2. Thinner Coatings Measurement
By focusing more X-ray tube output onto the sample, an XRF analyzer fitted with a polycapillary optic can measure nanometer-scale coatings and measure thicker coatings with better precision.
3. Increased Testing Throughput with Higher Confidence
A greater intensity generated by the optic results in higher count rates. In XRF, higher count rates translate into improved precision and faster results. This allows for more measurements to be taken in any given time period and higher confidence in the results, leading to better quality control and tighter production.
4. Easier Conformity to Specifications
XRF plays an essential role in determining and controlling finish thickness to meet with performance specifications IPC-4552A for ENIG (electroless nickel immersion gold) and IPC-4556 for ENEPIG (electroless nickel electroless palladium immersion gold). In using XRF to meet the required specifications, analyzers must demonstrate performance levels within a defined tolerance. Using a capillary optic makes it easier to achieve this performance level and allows operations to run as close as possible to the minimum control limits, saving money on materials and chemicals. With recent advances in software, it is now possible to simultaneously measure the thickness and composition of electroless nickel coatings under gold and palladium, assuming these layers are thin enough to allow X-ray transmission.
Combining a polycapillary optic with a high-resolution detector such as a silicon drift detector (SDD), plus a high-precision stage, high-definition camera and clever software provides the ultimate analysis of ultra-fine coatings on ultra-fine features.
SPONSORED LINK
Learn more about Hitachi XRF Analysers.
Suggested Items
Real Time with... IPC APEX EXPO 2024: A Conversation with IPC's CEO: New Venue, Sustainability, and More
04/23/2024 | Real Time with...IPCBarry Matties hosts Dr. John W. Mitchell, CEO of IPC, on the final day of IPC APEX EXPO 2024. They discuss the new venue in Anaheim and broach a range of topics, from traffic and booth experiences to workforce development, sustainability, and the CHIPS Act. And they offer advice for newcomers as IPC looks forward to an even better show experience next year.
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.
What’s Next Becomes Now at IPC APEX EXPO 2024
04/22/2024 | IPCFrom revolutionary advancements in artificial intelligence, augmented reality and the latest innovations in capital equipment on the show floor to a heightened learner experience through the 16th Electronic Circuits World Convention (ECWC16) technical conference, IPC APEX EXPO 2024 provided education, professional development and numerous networking opportunities, for 3,723 attendees from 57 countries.
Real Time with... IPC APEX EXPO 2024: Looking Back, Looking Forward With IEC
04/19/2024 | Real Time with...IPC APEX EXPOIEC came to the RTW booth and discussed both the legacy of IEC's past and the vision for its future. Industry veteran Bruno Ferri highlighted his quarter-century tenure in the industry and with IEC since its founding. He still exhibits boundless enthusiasm for the industry. Brando Stone, a young professional and a future face of IEC, talked about IEC's plans going forward and his experience at this year's IPC APEX EXPO.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.